flue systems for wood burning stoves

 

Vesta’s Range of vitreous enamel and twin-wall flue systems. Made in the UK by Vesta Stoves and available in a full range of colours

Vesta Stoves produce a range of flue systems for wood burning stoves that are designed to work with all our  stoves. All our flue systems can be powder coated to match the finish on your woodburning stove.  We understand that flue systems can be difficult to specify and we can assist you with the correct selection based on some basic information.

What is a flue?

Flue systems can be broken down into the following categories:

  • Connecting flue pipes
    • These are the pipes which normally go from the stove to another flue way such as a masonry chimney, flexible liner, or twin wall flue system. They are commonly coated to the same colour as your stove
  • Flexible flue systems
    • These flues are generally made from stainless steel and sometimes are mistaken for twin wall flue systems. Although these are commonly made from several layers of stainless steel. They should not be confused with the rigid insulated type used to form a chimney. They are sold by the meter and can be cut to length if required.
  • Twin wall insulated flue systems
    • Made from two layers of stainless steel sandwiching a layer of insulation these pipes form, the basis of a chimney system. They are normally used in places where there is no chimney breast. These pipes cannot be cut to length and normally come in 1m and 0.5m lengths. A range of elbows and adjustable lengths are available to create your chimney.

.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Flexible stainless steel liners are recommended with wood burning stoves due to the temperature that the stove runs at. Flexible flue liners sometimes known as twin wall liners can be mixed up with twin wall insulated flue systems. Twin wall insulated flues are generally used to create a chimney where a wood burner is to be fitted in a property without a masonry chimney stack.

If you are unsure which flue components to select then please call us (01704 828067) and we will be happy to specify the system up for you. 

Filter

Showing 1–10 of 20 results

  • connecting flue pipe 5inch 125mm

    Connecting Flue Pipes for wood and Multifuel Stoves

    Colour Matched Connecting Flue 5 inch

    £49.50

    This connecting flue pipe is supplied in a 1 metre length ready for connection to your Vesta V2, V4, V6 tubular or V8 stove. The pipes are colour matched to your Vesta stove and can be easily cut to length if required.

    APPLICATION
    Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C.
    Stove pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System.
    Black stove pipe should NOT be used to pass through ceilings or wall.

    CONSTRUCTION
    Black stove pipe is a single skin flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
    Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C

    INSTALLATION
    You should not install a piece of Vitreous Enamel Stove Pipe within 3 times the diameter of the flue from combustible material, e.g. wood, plaster boards, etc.
    A 5 inch (125mm) diameter piece of Vitreous Enamel Stove Pipe should be 15 inches (375mm) away from combustible materials.
    When installing make sure Vitreous Enamel Stove Pipe is installed the correct way up – the smaller diameter should always be pointing downward.
    This is because all the condensates will stay within the flue system and not pass to the outside of Vitreous Enamel Stove Pipe.
    Each joint should be coated with a jointing compound (fire cement or high temperature silicone sealant).This makes sure that no condensate can escape and spoil the appearance of the pipe.

    MAINTENANCE
    You should make provision for inspecting and cleaning the chimney. This is particularly important on solid fuel applications.
    You can acheive this by installing a Vitreous Enamel pipe with an access door.
    It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year.

    Select options
  • Connecting for for wood burning stoves 6 inch

    Connecting Flue Pipes for wood and Multifuel Stoves

    Colour Matched Connecting Flue 6 inch

    £55.45

    This connecting flue pipe is supplied in a 1 metre length ready for connection to your Vesta V12 stove. The pipes are colour matched to your Vesta Ironworks stove and can be easily cut to length if required.

    APPLICATION
    Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C.
    Stove pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System.
    Black stove pipe should NOT be used to pass through ceilings or wall.

    CONSTRUCTION
    Black stove pipe is a single skin flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
    Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C

    INSTALLATION
    You should not install a piece of Vitreous Enamel Stove Pipe within 3 times the diameter of the flue from combustible material, e.g. wood, plaster boards, etc.
    A 5 inch (125mm) diameter piece of Vitreous Enamel Stove Pipe should be 15 inches (375mm) away from combustible materials.
    When installing make sure Vitreous Enamel Stove Pipe is installed the correct way up – the smaller diameter should always be pointing downward.
    This is because all the condensates will stay within the flue system and not pass to the outside of Vitreous Enamel Stove Pipe.
    Each joint should be coated with a jointing compound (fire cement or high temperature silicone sealant).This makes sure that no condensate can escape and spoil the appearance of the pipe.

    MAINTENANCE
    You should make provision for inspecting and cleaning the chimney. This is particularly important on solid fuel applications.
    You can acheive this by installing a Vitreous Enamel pipe with an access door.
    It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year.

    Select options
  • Connecting Flue Pipes for wood and Multifuel Stoves

    Colour matched 45 Degree Elbow 5 inch

    £42.50 Select options
  • connecting flue pipe 5inch 125mm

    Connecting Flue Pipes for wood and Multifuel Stoves

    Colour Matched Connecting Flue 4 inch

    £49.50

    This connecting flue pipe is supplied in a 1 metre length ready for connection to your Vesta V2, V4, V6 tubular or V8 stove. The pipes are colour matched to your Vesta stove and can be easily cut to length if required.

    APPLICATION
    Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C.
    Stove pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System.
    Black stove pipe should NOT be used to pass through ceilings or wall.

    CONSTRUCTION
    Black stove pipe is a single skin flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
    Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C

    INSTALLATION
    You should not install a piece of Vitreous Enamel Stove Pipe within 3 times the diameter of the flue from combustible material, e.g. wood, plaster boards, etc.
    A 5 inch (125mm) diameter piece of Vitreous Enamel Stove Pipe should be 15 inches (375mm) away from combustible materials.
    When installing make sure Vitreous Enamel Stove Pipe is installed the correct way up – the smaller diameter should always be pointing downward.
    This is because all the condensates will stay within the flue system and not pass to the outside of Vitreous Enamel Stove Pipe.
    Each joint should be coated with a jointing compound (fire cement or high temperature silicone sealant).This makes sure that no condensate can escape and spoil the appearance of the pipe.

    MAINTENANCE
    You should make provision for inspecting and cleaning the chimney. This is particularly important on solid fuel applications.
    You can acheive this by installing a Vitreous Enamel pipe with an access door.
    It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year.

    Select options
  • Flexible Flue Liners

    Flexible Flue Liner 6 inch Kit 316 Grade

    £39.98£259.87 Select options
  • 1000mm twin wall flue

    flue systems for wood burning stoves

    Twin Wall Insulated Flue 6inch 1000mm

    £100.44

    Twin wall insulated flue pipe 1000mm Pipe Length.
    The effective installed length is 962mm.

    This item comes with a FREE Locking Band.

    APPLICATION
    For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler and any solid fuel appliances.

    Select options
  • flue systems for wood burning stoves

    Twin Wall Insulated Flue 6 inch Wall Bracket

    £20.70 Select options
  • flue systems for wood burning stoves

    Twin Wall Insulated Flue 6 inch Locking Band

    £9.96 Select options
  • 90 degree connector for rear connection on stoves

    Connecting Flue Pipes for wood and Multifuel Stoves

    5 inch 90 Degree T Section For Rear Connection of Vesta Stoves

    £44.54 Select options
  • Connecting Flue Pipes for wood and Multifuel Stoves

    Colour matched 45 Degree Elbow 6 inch

    £52.00 Select options

Spring Sale Now On

Whilst Stock Last

Tel 01704 821095

The Fiesta Garden Stove is now in Stock

10%OFF

Spring Sale discount code now active. Fill in the form to get the code sent direct to your inbox

Get In Touch

For our fastest response please use the contact form below.

Our response is normally within a 15 minutes during office hours

Contact Information

01704 821095
sales@vestastoves.co.uk

Opening Hours

Monday – Friday 9am-1pm 
Weekend – Closed

Address

Sevenoaks, 197 Hesketh Lane. Tarleton. PR4 6AT