- 6″ diameter twin wall insulated flue wall bracket
- AISI 316 Inner 304 outer
- Available as standard stainless steel finish or powdercoated in any of the standard Vesta colour range
Twin Wall Insulated Flue 6 inch Wall Bracket
£20.70
| Weight | 40 kg |
|---|---|
| Dimensions | 406.00000000 × 600.00000000 × 650.00000000 mm |
| Colour | Black (Metallic Black), Blue (Metallic Blue), Brown (Honey Glow Brown), Brown (Metallic Brown), Brown (Metallic Rich Brown), Charcoal, Grey (Light), Pewter, Red (Mojave Red) |
Related products
-
-
Connecting Flue Pipes for wood and Multifuel Stoves
Colour Matched Connecting Flue 4 inch
£49.50This connecting flue pipe is supplied in a 1 metre length ready for connection to your Vesta V2, V4, V6 tubular or V8 stove. The pipes are colour matched to your Vesta stove and can be easily cut to length if required.
APPLICATION
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C.
Stove pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System.
Black stove pipe should NOT be used to pass through ceilings or wall.CONSTRUCTION
Black stove pipe is a single skin flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees CINSTALLATION
You should not install a piece of Vitreous Enamel Stove Pipe within 3 times the diameter of the flue from combustible material, e.g. wood, plaster boards, etc.
A 5 inch (125mm) diameter piece of Vitreous Enamel Stove Pipe should be 15 inches (375mm) away from combustible materials.
When installing make sure Vitreous Enamel Stove Pipe is installed the correct way up – the smaller diameter should always be pointing downward.
This is because all the condensates will stay within the flue system and not pass to the outside of Vitreous Enamel Stove Pipe.
Each joint should be coated with a jointing compound (fire cement or high temperature silicone sealant).This makes sure that no condensate can escape and spoil the appearance of the pipe.MAINTENANCE
Select options
You should make provision for inspecting and cleaning the chimney. This is particularly important on solid fuel applications.
You can acheive this by installing a Vitreous Enamel pipe with an access door.
It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year. -
flue systems for wood burning stoves
Twin Wall Insulated Flue 6inch 15 Degree Elbow
£77.53 Select options -
Mark Brocklehurst (verified owner) –