Twin Wall Insulated Flue 6 inch 90 Degree Elbow With Sump

Related products

• 

  Connecting Flue Pipes for wood and Multifuel Stoves

  Colour matched 45 Degree Elbow 6 inch

  £52.00 Select options This product has multiple variants. The options may be chosen on the product page
• 

  Flexible Flue Liners

  Flexible Flue Liner 6 inch Kit 316 Grade

  £39.98 – £259.87 Select options This product has multiple variants. The options may be chosen on the product page
• 

  flue systems for wood burning stoves

  Twin Wall Insulated Flue 6inch 100mm long

  £64.23 Select options This product has multiple variants. The options may be chosen on the product page
• 

  Connecting Flue Pipes for wood and Multifuel Stoves

  Colour Matched Connecting Flue 6 inch

  £55.45

  This connecting flue pipe is supplied in a 1 metre length ready for connection to your Vesta V12 stove. The pipes are colour matched to your Vesta Ironworks stove and can be easily cut to length if required.

  APPLICATION
  Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C.
  Stove pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System.
  Black stove pipe should NOT be used to pass through ceilings or wall.

  CONSTRUCTION
  Black stove pipe is a single skin flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
  Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C

  INSTALLATION
  You should not install a piece of Vitreous Enamel Stove Pipe within 3 times the diameter of the flue from combustible material, e.g. wood, plaster boards, etc.
  A 5 inch (125mm) diameter piece of Vitreous Enamel Stove Pipe should be 15 inches (375mm) away from combustible materials.
  When installing make sure Vitreous Enamel Stove Pipe is installed the correct way up – the smaller diameter should always be pointing downward.
  This is because all the condensates will stay within the flue system and not pass to the outside of Vitreous Enamel Stove Pipe.
  Each joint should be coated with a jointing compound (fire cement or high temperature silicone sealant).This makes sure that no condensate can escape and spoil the appearance of the pipe.

  MAINTENANCE
  You should make provision for inspecting and cleaning the chimney. This is particularly important on solid fuel applications.
  You can acheive this by installing a Vitreous Enamel pipe with an access door.
  It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year.

  Select options This product has multiple variants. The options may be chosen on the product page